Rotel Stereo Amplifier RMB 1512 User Guide

RMB-1512

12-Channel Custom Installation Ampliﬁer

Description

No longer do you need to purchase several large ampliﬁers to obtain a high performance multizone audio system. The RMB-1512

features an advanced Class D design that provides plenty of power (12 x 100 watts into 8 ohms) for the most demanding mulitzone

audio systems, but never runs the danger of overheating itself or other electronic components placed in the same vicinity. The RMB-

1512 features everything needed for remote operation and custom installation including 12 volt trigger signal sensing, input bussing,

sum-to-mono, buffered link output, front panel attenuation control, ﬁve-way binding posts and screw terminals.

*Note – all Rotel 15 series components may be rack mounted and remotely controlled via RS-232, IR, or 12 volt (depending on model) for complete

stealth operation.

Speciﬁcations

Power Output

all channels driven

100 watts x 12ch (20 Hz-20kHz, <0.03% THD, 8 ohms)

200 watts x 12ch (20 Hz-20kHz, <0.03% THD, 4 ohms)

Frequency Response (±1 dB)

S/N Ratio (IHF A)

10Hz-40kHz (+3dB)

109 dB

IM Distortion

<0.02%

Dimensions (W x H x D) mm

Dimensions (W x H x D) in

431 x 144 x 407 mm

3U / 17 x 5 5/8 x 16 in

Damping Factor (8 ohms) >200

Input Sens. / Impedance 1.25 V/9.9 k Ohms

The Rotel Co. Ltd.

10-10 Shinsen-Cho

Shibuya-Ku,

Rotel of America

54 Concord St.

N. Reading, MA 01864

USA

T +1 978 664 3820

F +1 978 664 4109

Rotel Europe

Dale Road

Worthing

West Sussex BN11 2BH, UK

T +44 (0) 1903 221 763

F +44 (0) 1903 221 525

Tokyo 150, Japan