Revolabs TV Converter Box 07 stemic ppp User Guide

Line-to-Mic Converter

Users Guide

The Revolabs Solo™ Line-to-Mic Converter cable is designed to facilitate Revolabs system installations

requiring attenuation from line level to microphone level as found on many videoconferencing systems

and audio mixers. The cable also blocks phantom power bias voltages up to 48V.

To use the Line-to-Microphone level converter cable:

Step One:

Step Two:

Plug the 2.5mm mini-plug into the Solo Executive Single Channel analog line level input.

Insert the XLR Male connector to a microphone-level (-40dB) input channel on the audio mixer or

video codec.

Step Three: If desired, use the return audio RCA Female connector to monitor audio from the mixer / video

codec through an earpiece connected to the microphone.

Cable Specifications

Length: 6 Ft (1.8m)

Connectors: 2.5mm Male mini-plug, RCA Female, XLR Male with Phantom-blocking 40 dB signal attenuation circuit

Model: 07-STEMIC-PPP

Warranty

Revolabs, Inc. warrants this product to be free of manufacturing defects. Repair or replacement of any defective

part or unit (at the discretion of the Seller) will be free of charge for a period of 90 days after purchase.

Rev 1.1 10/07